HYDROSEAL
CEMENT & PRIMER

Manufacturer's Product Specification
Scope
This specification sheet covers the manufacturer's requirements for Solvent Cements, Primers, Cleaners and Thread Sealants. These products meet or exceed the standards set by the American Society for Testing and Materials, the National Sanitation Foundation and the British Standards Institute.
 
Solvent Cements/Primers/Thread Sealants
PVC(polyvinyl chloride) and CPVC(chlorinated polyvinyl chloride) cements meet or exceed ASTM D-2564 for PVC cement and F-493 for CPVC. Primers manufactured meet or exceed ASTM F-656. Material shall contain the specified amounts of color pigment, stabilizers, and other additives approved by the National Sanitation Foundation.
 
Marking
All products are marked as prescribed to indicate the manufacturer's name or trademark, size/length, and ASTM/BSE specifications. There must be clear distinguishing on those products that are required, all products shall be marked clearly with cautions and installation methods. Any expiry dates relevant shall clearly be marked on each product.
 
First Aid
All product which require careful handling shall also clearly be labeled with emergency First Aid directions.
45 Callibre PVC Cement

General Description :
Hydroseal® Canada 45 Callibre PVC Cement is a clear or gray, extra heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings, including Schedule 80, with interference fit through 12 inch diameter and non-pressure applications up to 18 inch diameter. It has good gap filling properties and is recommended for solvent cementing joints where a sizable gap exists between pipe and fitting - e.g. large pipe sizes - and when more working time is required in warm weather.
   
45 Callibre CPVC Cement

General Description :
Hydroseal® Canada 45 Callibre CPVC Cement is gray, low VOC emissions extra heavy bodied medium setting, high strength CPVC solvent cement for all classes and schedules of pipe and fittings with interference fit, including Schedule 80 through 12 inch diameter. Also recommended for PVC industrial piping systems for chemical applications.
   
90 Callibre Primer

General Description :
Hydroseal® Canada 90 Callibre Primer is a low VOC emission, non-bodied, fast acting, primer. The strong, aggresive action of 90 Callibre Primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. The benefit of this priming action is especially noticeable on parts being joined together in cold weather. Available in clear and purple; the latter allows easy identification when used on the joining surfaces.